Front Brake Hose Replacement. Opel Insignia Wagon (Global Epsilon) 2009

GM Service Manual Online

For 1990-2009 cars only

Makes 🢒 Opel 🢒 2009 🢒 Insignia Wagon (Global Epsilon) 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Front Brake Hose Replacement

Front Brake Hose Replacement J60, J61

Object Number: 2018589 Size: MF

Callout	Component Name
Warning: Refer to Brake Fluid Irritant Warning in the Preface section. Warning: Refer to Brake Dust Warning in the Preface section. Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
1	Brake Pipe Fitting Caution: Refer to Fastener Caution in the Preface section. Tip Cap the brake pipe fitting to prevent brake fluid loss and contamination. Tighten 18 N·m(15 lb ft)
2	Brake Hose Fitting Bolt Tighten 40 N·m(30 lb ft)
3	Brake Hose Fitting Gasket (Qty: 2) Procedure Install NEW gaskets. DO NOT reuse the brake hose fitting gaskets.
4	Front Brake Hose Procedure Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding.

Front Brake Hose Replacement J62

Object Number: 2018591 Size: MF

Callout	Component Name
Warning: Refer to Brake Fluid Irritant Warning in the Preface section. Warning: Refer to Brake Dust Warning in the Preface section. Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
1	Brake Pipe Fitting Caution: Refer to Fastener Caution in the Preface section. Tip Cap the brake pipe fitting to prevent brake fluid loss and contamination. Tighten 18 N·m(13 lb ft)
2	Brake Hose Fitting Bolt Tighten 40 N·m(30 lb ft)
3	Brake Hose Fitting Gasket (Qty: 2) Procedure Install NEW gaskets. DO NOT reuse the brake hose fitting gaskets.
4	Front Brake Hose Procedure Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding.