Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

1. Turn OFF the ignition.
2. Turn ON the ignition, with the engine OFF.
3. Observe the tire pressure indicator on the systems monitor, or the instrument panel cluster (IPC) during the bulb check.

Does the warning indicator illuminate during the bulb check?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gages, and Console.

Did you complete the replacement?

Go to Step  4

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2