Tail Lamp Replacement Chevrolet

1. Reposition the rear compartment trim to access the taillamp nuts.



2. Remove the taillamp nuts.
3. Pull the taillamp outward from the rear end finishing panel.



4. Remove the following wiring harness sockets from the taillamp:

•	The taillamp/stoplamp socket (1)

•	The taillamp socket (2)

•	The back-up lamp socket (3)

•	The turn signal socket (4)

1. Install the following wiring harness sockets to the taillamp.

•	The turn signal socket (4)

•	The back-up lamp socket (3)

•	The taillamp socket (2)

•	The taillamp/stoplamp socket (1)




2. Install the taillamp to the rear end finishing panel.
3. Install the taillamp nuts.

Tighten
Tighten the taillamp nuts to 3 N·m (27 lb in).

4. Reinstall the rear compartment trim.

Tail Lamp Replacement Pontiac

1. Reposition the rear compartment trim to access the taillamp nuts.



2. Remove the taillamp nuts.
3. Remove the taillamp from the rear end panel.
4. Remove the taillamp filler, if needed.

Remove both taillamps in order to replace the taillamp filler.




5. Remove the following wiring harness sockets remove the taillamp:

•	The taillamp socket (1)

•	The taillamp/stoplamp/turn signal sockets (3, 4)

•	The back-up lamp socket (2)

1. Install the following wiring harness sockets to the taillamp.

•	The back-up lamp socket (2)

•	The taillamp/stoplamp/turn signal sockets (3, 4)

•	The taillamp socket (1)

2. Install the taillamp filler, if needed.



3. Install the taillamp to the rear end panel.
4. Install the taillamp nuts.

Tighten
Tighten the taillamp nuts to 3 N·m (27 lb in).

5. Reinstall the rear compartment trim.