Front Bumper Fascia Replacement Chevrolet

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .



2. Remove the upper fascia retainers along the radiator support.
3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
4. Remove the front end fascia outer deflectors. Refer to Front Bumper Fascia Air Deflector Replacement .



5. Remove the fascia outer support nuts and bolts.
6. Disconnect all the electrical connectors from the fascia.



7. Remove the lower fascia retainers along the impact bar.
8. Remove the front fascia.
9. Transfer all necessary parts, if required.

1. Install the front fascia.



2. Install the lower fascia retainers along the impact bar.
3. Connect all the electrical connectors to the fascia.



4. Install the fascia outer support nuts and bolts.

Tighten

•	Tighten the fascia outer support nuts to 9 N·m (80 lb in).

•	Tighten the fascia outer support bolts to 5 N·m (44 lb in).

5. Install the front end fascia outer deflectors. Refer to Front Bumper Fascia Air Deflector Replacement
6. Lower the vehicle.



7. Install the upper fascia retainers along the radiator support.



8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.

Front Bumper Fascia Replacement Pontiac

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.



2. Remove the upper fascia retainers along the radiator support.
3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
4. Remove the front end fascia outer deflectors. Refer to Front Bumper Fascia Air Deflector Replacement .



5. Remove the fascia outer support nuts and bolts.
6. Disconnect all the electrical connectors from the fascia.



7. Remove the lower fascia retainers along the impact bar.
8. Manually raise the headlamps.
9. Remove the front bumper fascia.

1. Install the front bumper fascia.
2. Manually lower the headlamps.



3. Install the lower fascia retainers along the impact bar.
4. Connect all the electrical connectors to the fascia.



5. Install the fascia outer support nuts and bolts.

Tighten

•	Tighten the fascia outer support nuts to 9 N·m (80 lb in).

•	Tighten the fascia outer support bolts to 5 N·m (44 lb in).

6. Install the front end fascia outer deflectors. Refer to Front Bumper Fascia Air Deflector Replacement
7. Lower the vehicle



8. Install the upper fascia retainers along the radiator support.



9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.