Tow Hook Replacement Front (Export)

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the front bumper fascia air deflector. Refer to Front Bumper Fascia Air Deflector Replacement in Bumpers.
3. Remove the horn. Refer to Horn Replacement in Horns.



4. Remove the tow hook reinforcement nuts (1).
5. Remove the tow hook mounting plates (3).
6. Remove the tow hook (2) from rail.

1. Install the tow hook (2) to the rail.
2. Install the tow hook mounting plates (3).
3. Install the tow hook reinforcement nuts (1).

Tighten
Tighten the tow hook reinforcement nuts (1) to 70 N·m (52 lb ft).

4. Install the horn. Refer to Horn Replacement
5. Install the front bumper fascia air deflector. Refer to Front Bumper Fascia Air Deflector Replacement in Bumpers.
6. Lower the vehicle.

Tow Hook Replacement Rear Pontiac (Export)

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



2. Remove the rear tow hook bolt.
3. Remove the rear tow hook from the vehicle.



4. Remove the rear tow hook spacer, if necessary perform the following:

4.1.	Remove the rear bumper impact bar. Refer to Rear Bumper Impact Bar Replacement

4.2.	Unclip the spacer from the lower flange of the longitudinal rail.

4.3.	Rotate the spacer 90 degrees.

4.4.	Remove the spacer through the access slot in the rear end panel.

1. Install the rear tow hook spacer, if necessary perform the following:

1.1.	Install the spacer through the access slot in the rear end panel.

1.2.	Rotate the spacer 90 degrees.

1.3.	Clip the spacer to the lower flange of the longitudinal rail.

1.4.	Install the rear bumper impact bar. Refer to Rear Bumper Impact Bar Replacement




2. Install the rear tow hook to the vehicle.
3. Instal the rear tow hook bolt.

Tighten
Tighten the rear tow hook bolt to 205 N·m (151 lb ft).

4. Lower the vehicle.

Tow Hook Replacement Rear Chevrolet (Export)

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



2. Remove the rear tow hook bolt.
3. Remove the rear tow hook from the vehicle.



4. Remove the rear tow hook spacer, if necessary perform the following:

4.1.	Remove the rear bumper impact bar. Refer to Rear Bumper Impact Bar Replacement in Bumpers.

4.2.	Unclip the spacer from the lower flange of the longitudinal rail.

4.3.	Rotate the spacer 90 degrees.

4.4.	Remove the spacer through the access slot in the rear end panel.

1. Install the rear tow hook spacer, if necessary perform the following:

1.1.	Install the spacer through the access slot in the rear end panel.

1.2.	Rotate the spacer 90 degrees.

1.3.	Clip the spacer to the lower flange of the longitudinal rail.

1.4.	Install the rear bumper impact bar. Refer to Rear Bumper Impact Bar Replacement in Bumpers.




2. Install the rear tow hook from the vehicle.
3. Install the rear tow hook bolt.

Tighten
Tighten the rear tow hook bolt to 205 N·m (151 lb ft).

4. Lower the vehicle.