Important: Always maintain cleanliness when servicing fuel system components.

1. Relieve fuel system pressure. Refer to Fuel Pressure Relief .
2. Raise the vehicle. Go to Lifting and Jacking the Vehicle in general information.
3. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
4. Remove the fuel level sensor (8) from the modular fuel sender.

1. Install the fuel level sensor (8) to modular fuel sender.
2. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
3. Lower the vehicle.
4. Reconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in engine electrical.
5. Inspect for fuel leaks:

5.1.	Turn the ignition switch ON for 2 seconds

5.2.	Turn the ignition switch OFF for 10 seconds.

5.3.	Turn the ignition switch ON.

5.4.	Visually inspect the fuel system for fuel leaks.