| Subject: | Chevrolet Camaro SS, Chevrolet Camaro RS, Pontiac Firebird Firehawk,  Pontiac Firebird GT Warranty Administration Process | 
| Models: | 1996-2002 Chevrolet Camaro SS | 
 | 2001-2002 Chevrolet Camaro RS | 
 | 1996-2002 Pontiac Firebird Firehawk | 
 | 2001-2002 Pontiac Firebird GT | 
 
This bulletin is being revised to update the phone number and address for SLP Performance Parts. Please discard  Corporate Bulletin Number 01-00-89-014 (General Information).
Important: "IPC" dealers are not authorized to utilize this service  bulletin.
Important: For "GM of Canada" dealers, substitute the name "General  Motors of Canada Limited" for Chevrolet Division or Pontiac Division  whenever it appears in this bulletin.
General Information
The purpose of this bulletin is to provide information concerning the  Chevrolet Camaro SS, Chevrolet Camaro RS, Pontiac Firebird Firehawk, Pontiac  Firebird GT, SLP Engineering, and the standard and optional content of these  vehicles. It also advises
retail and wholesale service personnel of the warranty  administration processes supporting these vehicles.
In 1996 and 1997, the Camaro SS was an aftermarket appearance/performance  conversion offered by SLP Engineering to all Chevrolet dealers. Dealers ordered  the conversion by signing a separate agreement with SLP Engineering and entering  special processing
option code R7T.
In 1998, Chevrolet incorporated some of the standard conversion package  into an option available and warranted by General Motors. The process for  ordering the current Camaro SS, option code WU8, is outlined in the Dealer  Order Guide. Dealers/customers
may still choose to purchase additional optional  equipment through SLP Engineering, special processing option code Y2Y, by  completing a separate SLP agreement provided to dealers under a separate cover  letter.
The Pontiac Firebird Firehawk was started in 1996 as a ship-through  program, RPO R6V, similar to the Camaro SS program, except through  Pontiac dealers that signed agreements with SLP Engineering. In 1998, the  RPO was changed to RPO WU6.
No separate option is required as this  is a catch-all option.
In 2001, General Motors approved two new V6 programs for SLP. These  are the Chevrolet Camaro RS (RPO Y3B) and the Pontiac Firebird GT (RPO Y3C).
Except for the ordering and shipping accommodations, the dealer's agreement  for the purchase of, payment for, and warranty coverage for specific SLP components  are between the dealer and SLP and exclusive of Chevrolet Division, Pontiac  Division and
General Motors.
SLP Information
 
SLP Performance Parts
1501 Industrial Way North
Toms River, NJ 08755
 
SLP Customer and Dealer Relations
Phone (732)349-2109
Fax (732)244-0867
Camaro SS Standard Equipment and Associated VIN File Blocked Labor  Operations 1996-1997
The Camaro SS is only available on the Camaro Z28 Coupe, 1FP87 or the  Camaro Z28 Convertible, 1FP67 models. A file block has been initiated on the  following labor operations as ALL 1996 and 1997 Camaro SS units had this portion  of the conversion completed
by SLP. For 1996 and 1997, the following components  and the associated labor operations are warranted by SLP Engineering:
|     •  | Composite hood and functional air scoop | 
 
|          | Associated  labor operations - A0347, A0357, A0412, A0413, A0415, A0416, A9080,  B1500 | 
 
|     •  | Underhood forced air induction system | 
 
|          | Associated labor  operations - J0100, J0101, J5000, J5010, J5020, J6111 | 
 
|     •  | Revised rear decklid spoiler | 
 
|          | Associated labor operations  - A2755, A2776, B5606 | 
 
|     •  | B.F.Goodrich Comp T/A 275/40ZR17 tires (245/50ZR16 tires on Convertible) | 
 
|          | Associated labor operations - E0421, E0435 | 
 
|     •  | 17" X 9" ZR-1 styled cast aluminum alloy wheels (16"  X 8" version on Convertible) | 
 
|          | Associated labor operations  - E0022, E0023, E0027, E0200, E0201, E0203, E0420, E0460 | 
 
|          | Associated labor operations -  E2160, E2180 | 
 
|          | Associated labor operations - B7400,  B7401, B8700 | 
 
|     •  | Two Camaro SS key fobs and Camaro SS nameplate (key fobs 1997  only) | 
 
|          | Associated labor operations - R4490 | 
 
Listed below are the additional performance options available from SLP  Engineering for the 1996 and 1997 Camaro SS. These options may be purchased  separately or in combination. Many of the options will be evident based on  the components used and due
to the fact that replacement components must be  procured from SLP Engineering. Dealers should continue to submit SLP warranty  claims to SLP Engineering for 1996 and 1997 vehicles equipped with the following:
|     •  | Performance Exhaust System Package | 
 
|     •  | Level II Bilstein Suspension Package | 
 
|          | Associated labor operations -  J3140, J3175, J3120 | 
 
|     •  | Torsen Limited-Slip Differential Package w/AAM Aluminum Rear Axle  Cover | 
 
|     •  | Comp T/A 17" R1 Competition Series Tire Package | 
 
|     •  | Premium Front Floor Mats | 
 
|     •  | SS 30th Anniversary Package (1997 only), consisting of orange  duel hood, roof, deck lid and rear spoiler stripes, white SS wheels | 
 
1998 Chevrolet Camaro SS
Chevrolet incorporated much of the standard Camaro SS content for 1998.  The Camaro SS is only available on the Camaro Z28 Coupe, 1FP87 or the Camaro  Z28 Convertible, 1FP67 models. Regular Production Option (RPO) WU8 is required.  The following components
are added to the Chevrolet window sticker content,  and beginning with the 1998 model, are now warranted by Chevrolet Division:
|     •  | All new composite hood with functional air scoop | 
 
|     •  | All new SS-specific rear deck spoiler | 
 
|     •  | All new forced air induction system | 
 
|     •  | All new 3.5" single tip exhaust system | 
 
|     •  | Upgraded suspension components for improved handling | 
 
|     •  | 17" X 9" lightweight, five spoke aluminum painted  wheels | 
 
|     •  | 275/40/ZR17 Goodyear Eagle F1 tires | 
 
|     •  | Camaro SS exterior graphics | 
 
Additional performance options available from SLP Engineering require  RPO Y2Y in addition to the standard content. These options may be purchased  separately or in combination. Many of the options will be evident based on  the components used and
due to the fact that replacement components must be  procured from SLP Engineering. Dealers should continue to submit SLP warranty  claims to SLP Engineering for 1998 vehicles equipped with the following:
|     •  | All new Auburn high torque performance differentials | 
 
|     •  | All new 17" X 9" chrome-plated, five spoke aluminum  wheels | 
 
|     •  | Performance exhaust system with dual-dual outlets | 
 
|     •  | Bilstein ultra performance suspension system (N/A on Convertible) | 
 
|     •  | Hurst 6-speed manual shifter | 
 
|     •  | Castrol "Syntec" High Performance Lubricants Package | 
 
|     •  | Custom car cover with silk-screened Camaro SS graphics | 
 
|     •  | Two Camaro SS key fobs with one dash plaque | 
 
1999 Chevrolet Camaro SS
A few additional refinements were added for 1999. Again, the SS is only  available on the Camaro Z28 Coupe, 1FP87 or the Camaro Z28 Convertible, 1FP67  models. Regular Production Option (RPO) WU8 is required. The following components  were included in
the Chevrolet window sticker content and are warranted by  Chevrolet Division:
|     •  | Composite hood with functional air scoop | 
 
|     •  | SS-specific rear deck spoiler | 
 
|     •  | Forced air induction system | 
 
|     •  | All new dual outlet exhaust system | 
 
|     •  | Upgraded suspension components for improved handling | 
 
|     •  | 17" X 9" lightweight, five spoke aluminum painted  wheels | 
 
|     •  | 275/40/ZR17 Goodyear Eagle F1 tires | 
 
|     •  | Camaro SS exterior graphics | 
 
|     •  | All new Hurst shifter optional w/manual 6-speed transmission | 
 
Additional performance options available from SLP Engineering require  RPO Y2Y in addition to the standard content. These options may be purchased  separately or in combination. Many of the options will be evident based on  the components used and
due to the fact that replacement components must be  procured from SLP Engineering. Dealers should continue to submit SLP warranty  claims for SLP Engineering for 1999 vehicles equipped with the following:
|     •  | Auburn high torque performance differential | 
 
|     •  | 17" X 9" chrome-plated, five spoke aluminum wheels | 
 
|     •  | Performance exhaust system with dual-dual outlets | 
 
|     •  | Bilstein ultra performance suspension system (N/A on Convertible) | 
 
|     •  | Premium front floor mats with embroidered Camaro SS logo | 
 
|     •  | Castrol "Syntec" High Performance Lubricants Package | 
 
|     •  | Custom car cover with silk-screened Camaro SS graphics | 
 
|     •  | Two Camaro SS key fobs and one dash plaque | 
 
2000 Chevrolet Camaro SS
For the 2000 model year, the Camaro SS was basically unchanged except  the change from the 5-spoke painted wheel to the new 10-spoke wheel. Again,  the SS is only available on the Camaro Z28 coupe, 1FP87 or the Camaro Z28  Convertible, 1FPS7 models. Regular
Production Option (RPO) WU8 is required.  The following components were included in the Chevrolet window sticker content  and are warranted by Chevrolet Division.
|     •  | Composite hood with functional air scoop | 
 
|     •  | SS-specific rear deck spoiler | 
 
|     •  | Forced air induction system | 
 
|     •  | All new dual outlet exhaust system | 
 
|     •  | Upgraded suspension components for improved handling | 
 
|     •  | All new 17" X 9" lightweight, 10-spoke aluminum painted  wheels | 
 
|     •  | P275/40ZR17 Goodyear Eagle F1 tires | 
 
|     •  | Camaro SS exterior graphics | 
 
SLP content remained the same except for the addition of a new chrome  10-spoke wheel option, in addition to the 5-spoke chrome wheel. Dealers should  continue to submit SLP warranty claims for SLP Engineering for vehicles equipped  with the following:
|     •  | Auburn high torque performance differential | 
 
|     •  | 17" X 9" chrome-plated, 5-spoke or 10-spoke aluminum  wheels | 
 
|     •  | Performance exhaust system with dual-dual outlets | 
 
|     •  | Bilstein ultra performance suspension system (N/A on Convertible) | 
 
|     •  | Premium front floor mats with embroidered Camaro SS logo | 
 
|     •  | Castrol "Syntec" High Performance Lubricants Package | 
 
|     •  | Custom car cover with silk-screened Camaro SS graphics | 
 
|     •  | Two Camaro SS key fobs and one dash plaque | 
 
2001 Chevrolet Camaro SS
For the 2001 model year, the Camaro SS was again unchanged except the  horsepower rating was increased to 325 HP. All other content remained  the same. The following components were included in the Chevrolet window sticker  content and are warranted
by Chevrolet Division.
|     •  | Composite hood with functional air scoop | 
 
|     •  | SS-specific rear deck spoiler | 
 
|     •  | Forced air induction system | 
 
|     •  | All new dual outlet exhaust system | 
 
|     •  | Upgraded suspension components for improved handling | 
 
|     •  | All new 17" X 9" lightweight, 10-spoke aluminum painted  wheels | 
 
|     •  | P275/40ZR17 Goodyear Eagle F1 tires | 
 
|     •  | Camaro SS exterior graphics | 
 
The SLP Y2Y options were changed slightly to include the items listed  below. Dealers should continue to submit SLP warranty claims for SLP Engineering  for vehicles equipped with the following:
|     •  | Auburn high torque performance differential | 
 
|     •  | 17" X 9" chrome-plated, 5-spoke or 10-spoke aluminum  wheels | 
 
|     •  | Performance exhaust system with dual-dual outlets | 
 
|     •  | Bilstein ultra performance suspension system available on convertible  with revised progressive springs, bigger stabilizer bars | 
 
|     •  | Premium front floor mats with embroidered Camaro SS logo | 
 
|     •  | Custom car cover with silk-screened Camaro SS graphics | 
 
|     •  | Two Camaro SS key fobs and one dash plaque | 
 
|     •  | 1LE suspension, which was a GM option, now offered by SLP exclusively | 
 
|     •  | BF Goodrich g-Force TA KD 275/40ZR 17" tires | 
 
|     •  | Center mounted performance exhaust system including flush mounted  rear fascia extension and center dual tips with polished edges | 
 
|     •  | Rear deck mats with embroidered Camaro SS logo | 
 
|     •  | Commemorative portfolio, including SLP engraved pen, notepad,  tire tread depth gauge, a customized "Certificate of Authenticity"  and vehicle specifications card | 
 
2001 Chevrolet Camaro SS
Chevrolet introduced the 35th Anniversary Edition Camaro SS for the  2002 model year. This vehicle featured distinctive silver checkered flag stripes,  black painted 10-spoke wheels with machined faces and special embroidered  seats and side fender badges.
These components were included in the Chevrolet  window sticker content and are warranted by Chevrolet Division. SLP introduced  a new airbox lid and Donaldson filter that raised the advertised horsepower  to 345 when coupled with one of the optional SLP exhaust
systems. All other  content remained carryover. Dealers should continue to submit SLP warranty  claims for SLP Engineering for vehicle equipment.
Camaro RS 2001 and 2002 Standard Equipment
SLP introduced the Camaro RS option as a two-sticker program in the  2001 model year. The option required Option Code Y3B. It was available  on all Camaro V6 coupes, T-tops and convertibles. The Camaro RS is a ship-through  program that SLP manufactures,
markets and sells through the Chevrolet dealership  network. All the content that is added by SLP is warranted by SLP for 36 months/36,000 miles  (60,000 km).
Standard
|     •  | Available on Camaro V6 Coupe, T-top and convertible models | 
 
|     •  | Front grille with Chevrolet bowtie logo | 
 
|     •  | Camaro RS interior dash plaque | 
 
|     •  | Three exterior RS badges | 
 
|     •  | Dual exhaust with high performance muffler | 
 
|     •  | Camaro RS dual stripe package | 
 
|        -  | Black stripe (N/A with Navy Blue or Black exterior) | 
 
|        -  | Silver stripe (N/A with Light Pewter or Sunset Orange exterior) | 
 
Optional
|     •  | 16" X 8" silver-painted 5-spoke ZR1 style wheels | 
 
|     •  | Rally Sport Suspension Package (includes larger front and rear  stabilizer bars) | 
 
Pontiac Firebird Firehawk
 
1996 Pontiac Firehawk
The Firebird Firehawk is a ship-through program that SLP manufactures,  markets and sells through the Pontiac dealership network. All the content  that is added by SLP is warranted by SLP for 36 months/36,000 miles  (60,000 km).
Standard (requires Option Codes R6V and QLC)
|     •  | Lightweight RTM console hood w/functional cold air induction | 
 
|     •  | Performance air induction featuring a high flow A/C filter (upper  and lower air box) | 
 
|     •  | Performance stainless steel exhaust (intermediate and over axle  pipe, muffler, two tailpipes exiting driver's side of muffler) | 
 
|     •  | 17" X 9" aluminum painted wheels (includes center  caps and valve stems) (16" X 8" wheels on convertible) | 
 
|     •  | P275/40ZR17 Firestone Firehawk tires | 
 
|     •  | Quaker State Synquest synthetic engine oil | 
 
|     •  | Firehawk exterior and interior graphics | 
 
Optional
|     •  | 17" X 9" chrome plated or polished aluminum wheels  (includes center caps and valve stems) (16" X 8" wheels on convertible) | 
 
|     •  | Torsen limited slip differential (includes Performance Lubricants  Package and aluminum cooling cover) | 
 
|     •  | Performance Lubricants Package (includes synthetic rear axle lube,  semi-synthetic power steering fluid and synthetic media engine oil filter) | 
 
|     •  | Firehawk car cover (with locking cable and tote bag) | 
 
|     •  | Level II Bilstein suspension (front and rear shock and springs,  rear lower control arms) (N/A on convertible) | 
 
|     •  | Hurst shifter (shifter box and leather "H" embossed  shift box) | 
 
|     •  | Firehawk embroidered front floor mats | 
 
A limited production variant of this vehicle was also available, named  the Comp T/A:
Standard (requires Option Codes R6V and QLC)
|     •  | Only offered in Bright Silver Metallic exterior color and Graphite  leather interior | 
 
|     •  | Lightweight RTM composite hood w/functional cold air induction | 
 
|     •  | Performance air induction featuring a high flow A/C filter (upper  and lower air box) | 
 
|     •  | 17" X 9" cast aluminum Firehawk wheels (includes center  caps and valve stems) | 
 
|     •  | BFG Comp T/A P275/40ZR17 tires | 
 
|     •  | Performance stainless steel exhaust (intermediate and over axle  pipe, muffler, two tailpipes exiting driver's side of muffler) | 
 
|     •  | Quaker State Synquest synthetic engine oil | 
 
|     •  | Interior commemorative plaque and two matching key fobs listing  build number | 
 
|     •  | Gray center stripe (covers hood, roof and spoiler) | 
 
|     •  | Matching Comp T/A decals (both doors, front driver's side headlamp  door, passenger rear fascia and wheel caps) | 
 
|     •  | 32mm front sway bar and rear pan hard rod | 
 
Optional
|     •  | Torsen limited slip differential (includes Performance Lubricants  Package and aluminum cooling cover) | 
 
|     •  | Level II Bilstein suspension (front and rear shocks and springs,  rear lower control arms) (N/A on convertible) | 
 
|     •  | Performance Lubricants Package (includes synthetic rear axle lube,  semi-synthetic power steering fluid and synthetic media engine oil filter) | 
 
|     •  | Comp T/A embroidered front floor mats | 
 
|     •  | Comp T/A car cover (with locking cable and tote bag) | 
 
1997 Pontiac Firehawk
The Firehawk was carried over for the 1997 model year. The Firebird  Firehawk is a ship-through program that SLP manufactures, markets and sells  through the Pontiac dealership network. All the content that is added by SLP  is warranted by SLP for 36 months/36,000 miles
(60,000 km).
Standard (requires Option Codes R6V and QLC)
|     •  | Composite hood with functional air scoop | 
 
|     •  | Underhood forced air induction system | 
 
|     •  | Performance stainless steel exhaust (intermediate and over axle  pipe, muffler, two tailpipes) | 
 
|     •  | Quaker State Synquest synthetic engine oil | 
 
|     •  | Revised suspension (coupe and T-tops only) (includes 32mm front  sway bar and bushings, rear pan hard rod and jounce bumper spacers) | 
 
|     •  | 17" X 9" aluminum painted wheels (includes center  caps and valve stems) (16" X 8" wheels on convertible) | 
 
|     •  | SZ 50 275/40ZR17 Firestone Firehawk tires (SZ 50 245/50ZR16 tires  on convertible) | 
 
|     •  | Firehawk exterior and interior graphics | 
 
Optional
|     •  | 17" X 9" chrome plated or polished aluminum wheels  (includes center caps and valve stems) (16" X 8" wheels on convertible) | 
 
|     •  | Torsen limited slip differential (includes Performance Lubricants  Package and aluminum cooling cover) | 
 
|     •  | Performance Lubricants Package (includes synthetic rear axle lube,  semi-synthetic power steering fluid and synthetic media engine oil filter) | 
 
|     •  | Level II Bilstein Suspension (front and rear shocks and springs,  rear lower control arms) (N/A on convertible) | 
 
|     •  | Hurst shifter (shifter box and leather "H" embossed  shift knob) | 
 
|     •  | Firehawk embroidered front floor mats | 
 
|     •  | Silk-screened Firehawk car cover (with locking cable and tote  bag) | 
 
Two special editions were available in the 1997 model year:
1997 Pontiac Firehawk - LT4
Identically equipped on all 29 vehicles built:
|     •  | Black or red exterior colors only | 
 
|     •  | Firebird Formula 1SB option package | 
 
|     •  | Stainless steel exhaust manifolds | 
 
|     •  | Free-flow dual exhaust with twin tips | 
 
|     •  | Level II Bilstein suspension | 
 
|     •  | 17" X 9" chrome plated aluminum wheels (includes center  caps and valve stems) | 
 
|     •  | Torsen limited slip differential (includes Performance Lubricants  Package and aluminum cooling cover) | 
 
|     •  | Hurst shifter (shifter box and leather "H" embossed  shift knob) | 
 
|     •  | Quaker State Synquest synthetic engine oil | 
 
|     •  | Firehawk embroidered front floor mats | 
 
|     •  | Silk-screened Firehawk car cover (with locking cable and tote  bag) | 
 
|     •  | "330 HP" graphics on the hood and rear panel | 
 
|     •  | Two Firehawk key fobs and cloisonné dash plaque | 
 
Optional
Level III suspension (front and rear shocks and springs, rear lower  control arms, 32mm front sway bar w/revised endlinks, bushings and mounting  brackets, 21mm rear sway bar w/bushings, rear pan hard rod w/bushings, sleeves,  grease fittings and bearings)
1997 Pontiac Firehawk Comp T/A
|     •  | Only offered in Bright Silver Metallic exterior color and Graphite  leather interior | 
 
|     •  | Lightweight RTM composite hood with functional cold air induction | 
 
|     •  | Performance air induction featuring a high flow A/C filter (upper  and lower air box) | 
 
|     •  | 17" X 9" cast aluminum Firehawk wheels (includes center  caps and valve stems) | 
 
|     •  | BFG Comp T/A P275/40ZR17 tires | 
 
|     •  | Performance stainless steel exhaust (intermediate and over axle  pipe, muffler, two tailpipes exiting driver's side of muffler) | 
 
|     •  | Quaker State Synquest synthetic engine oil | 
 
|     •  | Gray center stripe (covers hood, roof and spoiler) | 
 
|     •  | Matching Comp T/A decals (both doors, front driver's side headlamp  door, passenger rear fascia and wheel caps) | 
 
|     •  | 32mm front sway bar and rear pan hard rod | 
 
Optional
|     •  | Torsen limited slip differential (includes Performance Lubricants  Package and aluminum cooling cover) | 
 
|     •  | Level II Bilstein suspension (front and rear shocks and springs,  rear lower control arms) (N/A on convertible) | 
 
|     •  | Performance Lubricants Package (includes synthetic rear axle lube,  semi-synthetic power steering fluid and synthetic media engine oil filter) | 
 
|     •  | Hurst shifter (shifter box and leather "H" embossed  shift knob) | 
 
|     •  | BF Goodrich Comp T/A R1 17" tires (only available as second  set with wheels) (N/A on convertible) | 
 
|     •  | Comp T/A embroidered front floor mats | 
 
|     •  | Silk-screened Comp T/A car cover (with locking cable and tote  bag) | 
 
1998 Pontiac Firehawk
There was no Firehawk production in the 1998 model year.  The Firebird  Firehawk is a ship-through program that SLP manufactures, markets and sells  through the Pontiac dealership network. All the content that is added by SLP  is warranted by SLP for 36 months/36,000 miles
(60,000 km).
1999 Pontiac Firehawk
The Firehawk was available on all models, coupes and convertibles, Trans  Am and Formula.  The Firebird Firehawk is a ship-through program that SLP  manufactures, markets and sells through the Pontiac dealership network. All  the content that is added
by SLP is warranted by SLP for 36 months/36,000 miles  (60,000 km).
Standard (requires option code WU6)
|     •  | All-new, Firehawk exclusive composite hood with functional air  scoops and hood-mounted heat extractors | 
 
|     •  | All-new, Firehawk exclusive underhood forced air induction system | 
 
|     •  | All-new, Firehawk front fascia badge | 
 
|     •  | Performance exhaust with dual-dual outlets (includes intermediate  and over axle pipes, muffler, tail pipes and tips) | 
 
|     •  | Upgraded suspension components (includes 32mm front sway bar and  bushings, rear pan hard rod and jounce bumper spacers) | 
 
|     •  | 17" X 9" lightweight aluminum painted wheels (including  Firehawk logo center caps and valve stems) | 
 
|     •  | Firestone Firehawk 275/40ZR17 SZ50 17" tires | 
 
|     •  | Firehawk exterior graphics on doors and rear fascia | 
 
|     •  | Firehawk dash plaque and two key fobs | 
 
|     •  | Available on all Trans Am and Formula models | 
 
Optional
|     •  | All-new Auburn High Torque Performance Differential (includes  AAM aluminum cooling cover, revised magnet and vent tube) | 
 
|     •  | Bilstein Ultra Performance Suspension System (N/A on convertible)  (includes front and rear Bilstein shock, progressive rate springs and revised  rear lower control arms) | 
 
|     •  | Castrol "Syntec" High Performance Lubricants Package  (includes 5W-30 Castrol "Syntec" engine oil fill and Castrol's  500,000 mile "Maximum Protection" limited warranty program) | 
 
|     •  | 17" X 9" chrome plated, 5-spoke aluminum wheels (includes  Firehawk logo center caps and valve stems) | 
 
|     •  | All-new, Firehawk exclusive, decklid spoiler (painted body color  with L.E.D. stop lamp) (only available on Trans Am V87X model) | 
 
|     •  | Firehawk silk-screened car cover (with locking cable and tote  bag) | 
 
|     •  | Firehawk embroidered front floor mats | 
 
2000 Pontiac Firehawk
Firehawk production continued on the 2000 model year as a carry-over  program.  The Firebird Firehawk is a ship-through program that SLP manufactures,  markets and sells through the Pontiac dealership network. All the content  that is added by SLP is warranted
by SLP for 36 months/36,000 miles  (60,000 km).
Standard (requires option code WU6)
|     •  | Firehawk exclusive, composite hood with functional air scoops  and hood mounted heat extractors | 
 
|     •  | Firehawk exclusive, underhood forced air induction system | 
 
|     •  | Firehawk front fascia badge | 
 
|     •  | Performance exhaust with dual-dual outlets (includes intermediate  and over axle pipes, muffler, tailpipes and tips) | 
 
|     •  | Upgraded suspension components (includes 32mm front sway bar and  bushings, rear pan hard rod and jounce bumper spacers) | 
 
|     •  | 17" X 9" lightweight aluminum painted wheels (includes  Firehawk logo center caps and valve stems) | 
 
|     •  | Firestone Firehawk 275/40ZR17 SZ50 17" tires | 
 
|     •  | Firehawk exterior graphics on the doors and rear fascia | 
 
|     •  | Firehawk dash plaque and two key fobs | 
 
|     •  | Available on all Trans Am and Formula models | 
 
Optional
|     •  | Auburn High Torque Performance Differential (includes AAM aluminum  cooling cover, revised magnet and vent tube) | 
 
|     •  | Bilstein Ultra Performance Suspension System (N/A on convertible)  (includes front and rear Bilstein shock, progressive rate springs and revised  rear lower control arms) | 
 
|     •  | Castrol "Syntec" High Performance Lubricants Package  (includes 5W-30 Castrol "Syntec" engine oil fill and Castrol's  500,000 mile "Maximum Protection" limited warranty program) | 
 
|     •  | 17" X 9" chrome plated, 5-spoke aluminum wheels (includes  Firehawk logo center caps and valve stems) | 
 
|     •  | All-new, Firehawk exclusive, decklid spoiler (painted body color  with L.E.D. stop lamp) (only available on Trans Am V87X model) | 
 
|     •  | Firehawk silk-screened car cover (with locking cable and tote  bag) | 
 
|     •  | Firehawk embroidered front floor mats | 
 
2001 Pontiac Firehawk
The 2001 model year introduced the 10th Anniversary Firehawk package.   The Firebird Firehawk is a ship-through program that SLP manufactures, markets  and sells through the Pontiac dealership network. All the content that is  added by SLP is warranted
by SLP for 36 months/36,000 miles  (60,000 km).
Standard (requires option code WU6)
|     •  | Firehawk exclusive, composite hood with functional air scoops  and hood mounted heat extractors | 
 
|     •  | Firehawk exclusive, underhood forced air induction system | 
 
|     •  | Firehawk front fascia badge | 
 
|     •  | Performance exhaust with dual-dual outlets (includes intermediate  and over axle pipes, muffler, tailpipes and tips) | 
 
|     •  | Upgraded suspension components (includes 32mm front sway bar and  bushings, rear pan hard rod and jounce bumper spacers) | 
 
|     •  | 17" X 9" lightweight aluminum painted wheels (includes  Firehawk logo center caps and valve stems) | 
 
|     •  | Firestone Firehawk 275/40ZR17 SZ50 17" tires | 
 
|     •  | Firehawk exterior graphics on the doors and rear fascia | 
 
|     •  | Firehawk dash plaque and two key fobs | 
 
|     •  | Available on all Trans Am and Formula models | 
 
Optional
|     •  | All-new Firehawk Trans Am 10th Anniversary Package* includes: | 
 
|        -  | Dual gold stripes with 10th Anniversary decals | 
 
|        -  | 10th Anniversary front fascia badge | 
 
|        -  | 17" X 9" gold painted aluminum wheels | 
 
|        -  | Unique decklid spoiler with stripes** | 
 
|        -  | **Convertible  models do not receive unique decklid spoiler | 
 
|        -  | Performance exhaust with gold painted exhaust tips | 
 
|        -  | 10th Anniversary dash plaque and key fobs | 
 
|        -  | Front floor mats with 10th Anniversary Firehawk logo | 
 
|        -  | 10th Anniversary Firehawk car cover with locking cable and tote  bag | 
 
|        -  | Commemorative portfolio | 
 
|     •  | Auburn High Torque Performance Differential (includes AAM aluminum  cooling cover, revised magnet and vent tube) | 
 
|     •  | Bilstein Ultra Performance Suspension System (includes front and  rear Bilstein shock, progressive rate springs, revised rear lower control  arms, 35mm front sway bar and revised attachments, 21mm rear sway bar and  bushings) | 
 
|     •  | 1LE suspension (offered exclusively by SLP, includes double adjustable  Koni shocks, production rate springs, revised rear lower control arms, 35mm  front sway bar and revised attachment, 21mm rear sway bar and bushings, front  upper and lower control
arms) | 
 
|     •  | 17" X 9" chrome plated, 5-spoke aluminum wheels (includes  Firehawk logo center caps and valve stems) | 
 
|     •  | All-new Commemorative Portfolio (includes SLP engraved pen, notepad,  tire tread depth gauge, a customized "Certificate of Authenticity"  and "Vehicle Specifications Card") | 
 
|     •  | All-new custom rear deck mat with embroidered Firehawk logo | 
 
|     •  | Firehawk silk-screened car cover (with locking cable and tote  bag) | 
 
|     •  | Firehawk embroidered front floor mats | 
 
2002 Pontiac Firehawk
The 2002 model year changes included making the 10th Anniversary available  on all Trans Am coupe-based Firehawks and a new air cleaner top and airbox,  raising the advertised horsepower of all Firehawks to 345 HP.  The  Firebird Firehawk is a ship-through
program that SLP manufactures, markets  and sells through the Pontiac dealership network. All the content that is  added by SLP is warranted by SLP for 36 months/36,000 miles  (60,000 km).
Firebird GT
 
2001 Pontiac Firebird GT
The Firebird GT is a V6 Firebird ship-through program that SLP manufactures,  markets and sells through the Pontiac dealership network. All the content  that is added by SLP is warranted by SLP for 36 months/36,000 miles  (60,000 km).
Standard (requires option code Y3C)
|     •  | Available on Firebird V6 coupe or T-top models | 
 
|     •  | Two Firebird GT exterior decals on B-pillars | 
 
|     •  | Dual-dual exhaust outlets with high performance muffler | 
 
|          | Adds 5 HP and more "throaty" exhaust note | 
 
|     •  | Firebird GT stripe package | 
 
|        -  | Solid black stripe (N/A with Navy Blue or Black exterior) | 
 
|        -  | Gradient Silver Stripe (N/A with Light Pewter or Sunset Orange  exterior) | 
 
Optional
|     •  | 16" X 8" silver painted aluminum Firehawk style wheels | 
 
|     •  | Performance suspension package (includes larger front and rear  stabilizer bars) | 
 
2002 Pontiac Firebird GT
Carryover from the 2001 model year, except the optional 16" Firehawk  style wheel has been replaced by the Pontiac production 16" Trans Am  wheel.
Warranty Coverage
SLP components are covered by SLP for 36 months/36,000 miles  (60,000 km) from the date of delivery to the retail purchaser or lessee.  This includes emission related components related to the underhood forced  air induction system.
SLP Warranty Process
At the introduction of this bulletin, dealers were advised that warranty  repairs for SLP components are the responsibility of SLP. The following is  the SLP warranty process:
|     •  | Dealer determines concern and identifies SLP component failure | 
 
|     •  | Dealer complete SLP "VEHICLE REPAIR and REPLACEMENT PARTS  ORDER and AUTHORIZATION FORM". (Forms are available from SLP). | 
 
|     •  | Fax completed form and copy of R.O. to SLP. Be sure to include  return fax and dealer telephone number. | 
 
|     •  | SLP confirms responsibility and provides repair authorization  by return fax. | 
 
|     •  | SLP ships parts to dealer. | 
 
|     •  | Parts package will include SLP purchase order to be used for labor,  courtesy transportation and towing. | 
 
|     •  | Dealer returns parts, R.O. and P.O. to SLP. Parts shipment costs  to be determined by SLP Engineering. | 
 
|     •  | When SLP receives the returned parts, a check from SLP Engineering  will be processed for payment to servicing dealers. | 
 
Parts Shipment
SLP will pay parts expediting shipment costs for all parts EXCEPT for  the SLP installed hood. When a SLP hood needs to be replaced under SLP's warranty,  it will be shipped normal ground carrier.
Labor Time Guide
SLP will use the applicable GM Labor Time Guide as a source for determining  the appropriate labor time amounts.
Part Allowance
SLP Engineering has agreed to a 5% parts handling allowance added  to the total SLP part cost.
Towing
SLP will pay for towing if an SLP component failed causing  the vehicle to be inoperable.
Alternate Transportation
SLP will pay a maximum of five days alternate transportation when an  SLP component is the cause of the vehicle downtime. Any additional rental  days must be pre-authorized by SLP.
Roadside Assistance
Owners will receive full Chevrolet Division or Pontiac Division Roadside  Assistance privileges.
SLP Component Identification
In 1998, SLP Engineering began applying an optional equipment decal  on the passenger side door frame.
Dealers may also contact SLP Performance Parts at (732)349-2109 for  additional vehicle conversion information by VIN.