This DTC identifies a malfunction within the EBCM.
The ignition switch is in the ON position.
DTC C0550 is set when an internal EBCM malfunction exists.
If equiped, the following actions occur:
| • | The EBCM disables the ABS/TCS and MSVA for the duration of the ignition cycle. | 
| • | A malfunction DTC will set. | 
| • | The ABS indicator turns on. | 
| • | The TCS indicator turns on. | 
| • | The Red BRAKE Warning indicator turns on. | 
| • | The condition for the DTC is no longer present and the DTC is cleared with a scan tool. | 
| • | The electronic brake control module (EBCM) automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles. | 
Step  | Action  | Yes  | No  | 
|---|---|---|---|
Schematic Reference: Antilock Brake System Schematics  | |||
1  | Did you perform the Diagnostic System Check?  | Go to Step 2  | |
2  | Are any other DTC(s) present besides C0550?  | Go to Step 3  | |
3  | Replace the EBCM. Refer to Electronic Brake Control Module Replacement . Is the replacement complete?  | Go to Step 4  | --  | 
4  | 
 Does the DTC reset?  | Go to Step 2  | System OK  |