1

Did you review the following description and operations and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Engine Electrical

Turn the ignition to the START position.

Did the starter solenoid click?

Go to Step 3

Go to Starter Solenoid Does Not Click

Inspect the engine and belt drive system for mechanical binding, (seized engine, seized generator).

Does the engine move freely?

Go to Step 4

Test the battery positive cable between the battery and the starter solenoid for high resistance. Refer to Circuit Testing or Wiring Repairs .

Did you find and correct the condition?

Go to Step 8

Go to Step 5

Test the ground circuit between the battery and the starter motor for a high resistance. Refer to Circuit Testing or Wiring Repairs .

Did you find and correct the condition?

Go to Step 8

Go to Step 6

Inspect for poor connections at the starter. Refer to Testing for Intermittent Conditions and Poor Connections or Connector Repairs .

Did you find and correct the condition?

Go to Step 8

Go to Step 7

Replace the starter. Refer to Starter Motor Replacement .

Did you complete the replacement?

Go to Step 8

--

Operate the system for which the symptom occurred.

Did you correct the condition?

System OK

Go to Step 3