GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 G3 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Exhaust Gas Recirculation Valve Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1248318 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the exhaust gas recirculation (EGR) valve electrical connector.
  3. Remove the bolts and the EGR valve.

Installation Procedure

    Object Number: 1248318 Size: SH
  1. Clean the cylinder head mating surface.
  2. Install a new EGR valve gasket.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the EGR valve with the retaining bolts.

    4. Tighten
    Tighten the EGR valve retaining bolts to 30 N·m (22 lb ft).

  4. Connect the EGR valve electrical connector.
  5. Connect the negative battery cable.