Step  | Action  | Yes  | No  | 
|---|---|---|---|
Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Theft Deterrent System Connector End Views DEFINITION: The theft deterrent alarm does not chirp when the system is armed and does not sound when the system is in alarm mode.  | |||
1  | Did you perform the Diagnostic System Check - Vehicle?  | Go to Step 2  | |
2  | 
 Do the turn signals flash to confirm the content theft deterrent (CTD) system is arming?  | Go to Step 3  | |
3  | 
 Does the test light illuminate?  | Go to Step 4  | Go to Step 5  | 
4  | 
 Does the test light illuminate?  | Go to Step 7  | Go to Step 6  | 
5  | 
 Did you complete the repair?  | Go to Step 11  | --  | 
6  | Test for an open in the ground feed circuit of the theft deterrent alarm. Refer to Testing for Continuity and Wiring Repairs . Did you find and correct the condition?  | Go to Step 11  | Go to Step 8  | 
7  | Test for a poor connection at the theft deterrent alarm . Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition?  | Go to Step 11  | Go to Step 9  | 
8  | Test for a poor connection at the remote control door lock receiver (RCDLR). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition?  | Go to Step 11  | Go to Step 10  | 
9  | Replace the RCDLR. Refer to Remote Control Door Lock Receiver Replacement . Did you complete the replacement?  | Go to Step 11  | --  | 
10  | Replace the theft deterrent alarm. Refer to Theft Deterrent Alarm Replacement . Did you complete the replacement?  | Go to Step 11  | --  | 
11  | Operate the system in order to verify the repair. Did you correct the condition?  | System OK  | Go to Step 2  |