GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 G6 🢒 Engine 🢒 Engine Mechanical - 2.4L 🢒 Engine Mount Bracket Replacement

Removal Procedure

    Object Number: 1571153 Size: SH
  1. Remove the engine mount. Refer to Engine Mount Replacement .
  2. Remove the engine mount bracket bolts.
  3. Remove the engine mount bracket.

Installation Procedure

    Object Number: 1571153 Size: SH
  1. Position the engine mount bracket to the engine.
  2. Install until snug the engine mount bracket bolts in the following locations:
    3. • The long bolts in the forward and front lower holes
    • The short bolt in the rear upper hole

    Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the engine mount bracket bolts.

    4. Tighten
    Tighten the bolts to 100 N·m (74 lb ft).

  4. Install the engine mount. Refer to Engine Mount Replacement .