GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 G6 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Engine Front Cover Assemble

Special Tools

    • EN-46103 Camshaft Actuator Valve Seal Remover/Installer
    • J 29184 Output Shaft Seal Installer

    Object Number: 1408429 Size: SH

    Important: Do not lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.

  1. Install the NEW crankshaft front oil seal into the engine front cover using the J 29184 .

    2. Object Number: 1579266 Size: SH
  2. Place the seal into position with the notches (1) in the seal down. The notches (1) will face inboard when properly installed.

    3. Object Number: 1408431 Size: SH
  3. Install the NEW camshaft position actuator valve oil seals into the engine front cover using the EN-46103 .