Passenger Presence System Scan Tool Data Parameters
Parameter | Operating Conditions | Expected Value | Definition |
|---|---|---|---|
Ignition is ON, engine OFF, and vehicle is stationary | |||
Battery Voltage | -- | Volts | This is the voltage input supplied to the passenger presence system. |
Power Mode | -- | OFF | The scan tool displays Off, Accessory, Run or Crank Request. This is the state of the ignition switch. |
Run | |||
Accessory | |||
Crank Request | |||
PPS Fault Status | -- | No Fault | The scan tool displays No Fault, Plant Mode, Fault, Mismatch or Barrier. This is the status of the PPS Fault monitor. |
PPS Enable Status | -- | Enabled | The scan tool displays Disabled or Enabled. This is the status of the PPS Enable. |
Disabled | |||
Passenger Status | -- | Valid | The scan tool displays No Info, Valid, Invalid Class, Invalid Pos, Invalid Data or Inval Class & Pos. |
Passenger Classification | Empty | The scan tool displays Empty , Small , Large . This is the state of the passenger seat, as monitored by the passenger presence system. | |
SDM Enable Status | Enabled | The scan tool displays Enabled or Disabled. This is the state of the SDM. | |
Primary Key Status | Valid | The scan tool displays Unknown, Valid or Invalid. This is the state of the primary key. | |
Received Primary Key | 0 | The scan tool displays the primary key received | |
