Removal Procedure
Notice: Clean all of the following areas before performing any disconnections
in order to avoid possible contamination in the system:
|    •  | The fuel pipe connections | 
 
|    •  | The areas surrounding the connections | 
 
- Relieve the fuel system pressure. Refer to 
Fuel Pressure Relief
 .
 
- Loosen the fuel filler cap to relieve any vapor pressure.
 
- Disconnect the negative battery cable. 
 
- Disconnect the engine compartment fuel feed pipe (1) at the fuel rail. 
 
- Cap the fuel pipe to prevent possible fuel system contamination.
 
Installation Procedure
- Install the engine compartment fuel feed pipe (1) at the fuel rail. 
 
- Install the fuel filler cap.
 
- Inspect for leaks.
 
- Connect the negative battery cable. 
 
| 4.1.  | Turn ON the ignition for 2 seconds. | 
 
| 4.2.  | Turn OFF the ignition for 2 seconds. | 
 
| 4.3.  | Turn ON the ignition. | 
 
| 4.4.  | Inspect for fuel leaks. | 
 
- Install both engine sight shield covers. Refer to 
Upper Intake Manifold Sight Shield Replacement
 .