Removal Procedure
- Remove the floor console. Refer to 
Front Floor Console Replacement 
 in Instrument  Panel, Gages, and Console.
 
- Disconnect the electrical connector.
 
- Disengage the retainers.
 
- Press the switch from the bottom out the
top  of the floor console. Remove the traction control switch.
 
Installation Procedure
- Align the tabs on the switch with the slots
in the floor console.
 
- Press  the traction control switch through
the opening in the floor console.
 
- Connect the electrical connector.
 
- Install the floor console. Refer to 
Front Floor Console Replacement 
 in Instrument  Panel, Gages, and Console.