Adjustment Procedure
- Disable the SIR. Refer to 
SIR Disabling and Enabling 
 in SIR.
 
- Using the power seat switch, run the seat adjuster rearward until the drive bracket (3) and the anchor bracket (2) are together on either side of the adjuster.
 
- Remove the drive cable (4) from the side of the adjuster which contains the brackets that touch.
 
- Use the power seat switch to run the adjuster rearward until the other pair of brackets are together.
 
- Install the removed drive cable.
 
Important: Inspect all 4 cables to verify that the cables are straight.
- Test the adjuster for proper operation.
 
- Enable the SIR. Refer to 
SIR Disabling and Enabling 
 in SIR.