Removal Procedure
- Remove the overhead console, if equipped. Refer to 
Roof Console Replacement
 in Interior Trim.
 
- Remove the sunshade anchors. Refer to 
Sunshade Anchor Replacement
 in Interior Trim.
 
- Remove the front dome lamp, if equipped.
 
- Lower the front of the headliner enough to gain access to the antenna cable. 
 
- Disconnect the antenna base lead.
 
- Loosen the antenna base nut.
 
- Remove the antenna base.
 
- If necessary, remove the mobile telephone antenna from the base.
 
Installation Procedure
- If necessary, install the mobile telephone antenna to the base. Hand tighten the
antenna until no visible gap appears between the antenna and the base.
 
- Route the antenna base lead through the roof.
 
- Align the antenna base to the roof with the locator pin.
 
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the antenna base bolt.
 
Tighten
Tighten the bolt to 9 N·m (80 lb in).
- Connect the antenna base lead.
 
- Install the sunshade anchors. Refer to 
Sunshade Anchor Replacement
 in Interior Trim.
 
- Install the headliner.
 
- Install the front dome lamp, if equipped.
 
- Install the overhead console, if equipped. Refer to 
Roof Console Replacement
 in Interior Trim.