- Remove the fourth clutch
shaft thrust washer (505).
- Remove the drive sprocket thrust washer (514). It may be stuck
to the case cover
- Remove the speed sensor reluctor wheel (527).
- Note the location of the master link on the drive link assembly
(507).
| • | It is the one link that is a different color than the rest. |
| • | It may be facing up or down towards the case. |
| • | The drive link assembly (507) must be in the same position during
assembly. |
- Lift the drive and driven sprockets (516, 506) with the drive
link assembly (507) out of the case.
| • | It may be necessary to tap the turbine shaft (518) up gently with
a rubber mallet |
- Remove the drive and driven sprocket thrust washers (517, 508).
They may be stuck to the sprockets
