Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
 
- Remove the air filter, resonator with snorkel assembly. Refer to 
Air Cleaner Assembly Replacement
 .
 
- Disconnect the optical sensor connector (1).
 
- Disconnect the ignition wires (2).
 
- Remove the ignition wire clip (3).
 
Important: Mark on the distributor housing and case before removing the distributor (1).
- Remove the distributor bolts (2).
 
- Carefully remove the distributor assembly (3).
 
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the distributor bolts (1).
 
Tighten
Tighten the distributor bolts to 10-16 N·m (89-142 lb in).
- Install the ignition wire clip.
 
- Connect the ignition wires and optical sensor connector.
 
- Install the air filter resonator with the snorkel assembly. Refer to 
Air Cleaner Assembly Replacement
 .
 
- Connect the negative battery cable.