GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 Solstice 🢒 Engine 🢒 Engine Mechanical - 2.0L 🢒 Engine Mount Replacement - Right Side

Removal Procedure

    Object Number: 1717067 Size: SH
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the right engine mount upper nut.
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    5. Object Number: 1717066 Size: SH
  5. Remove the right engine mount lower nut.

    6. Object Number: 1717062 Size: SH
  6. Remove the left engine mount lower nut.

    7. Object Number: 1717067 Size: SH
  7. Remove the right brake hose bracket bolt.
  8. Remove the right brake line clip at the crossmember.
  9. Position an adjustable jack below the oil pan. Place a block of wood between the oil pan and the jack.
  10. Raise the engine using the adjustable jack until the engine mount can be removed.
  11. Remove the right engine mount.

Installation Procedure

    Object Number: 1717067 Size: SH
  1. Install the right engine mount.
  2. Lower the engine using the adjustable jack until the engine is resting on the mount.
  3. Remove the adjustable jack from below the oil pan.
  4. Install the right brake line clip at the crossmember.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the right brake hose bracket bolt.

    6. Tighten
    Tighten the bolt to 10 N·m (89 lb in).


    Object Number: 1717062 Size: SH
  6. Install the left engine mount lower nut.

    7. Tighten
    Tighten the nut to 55 N·m (41 lb ft).


    Object Number: 1717066 Size: SH
  7. Install the right engine mount lower nut.

    8. Tighten
    Tighten the nut to 55 N·m (41 lb ft).

  8. Lower the vehicle.

    9. Object Number: 1717067 Size: SH
  9. Install the right engine mount upper nut.

    10. Tighten
    Tighten the nut to 55 N·m (41 lb ft).

  10. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  11. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .