Removal Procedure
Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing
any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to
the vehicle or its components. 
- Disconnect
the negative battery cable.
 
- Disable the supplemental inflatable restraint (SIR) system. Refer
to 
Disabling the SIR System 
in SIR.
 
- Remove the inflator restraint module. Refer to 
Inflatable Restraint Steering Wheel Module Replacement 
 in SIR.
 
- Remove the horn contact
from the steering column.
 
- Disconnect the horn contact wiring (2) from the 3 contacts (1)
on the inflator module (3).
 
Installation Procedure
- Connect the horn contact
wiring (2) to the 3 contacts (1) on the inflator module (3).
 
- Install the inflator module to the steering wheel. Refer to 
Inflatable Restraint Steering Wheel Module Replacement 
 in SIR.
 
- Enable the supplemental inflatable restraint (SIR) system. Refer
to 
Enabling the SIR System 
 in SIR.
 
- Connect the negative battery cable.