Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the Interior Lamps System Check?
| --
| Go to
Step 2
| Go to
Interior Lamps System Check
|
2
|
- Disconnect the multi-function alarm module harness connectors.
- Open the inoperative door.
- Use the J 39200
Digital
Multimeter (DMM) in order to measure the voltage between the appropriate multi-function
alarm module connector terminals:
| • | Driver door inoperative - connector C2 terminal D
and connector C1 terminal H |
| • | Passenger door inoperative - connector C2 terminal D
and connector C1 terminal G |
Does the voltage equal the specified value?
| B+
| Go to
Step 3
| Go to
Step 4
|
3
|
- Close the inoperative door.
- Use the J 39200
DMM
in order to measure the voltage between the appropriate multi-function alarm
module connector terminals:
| • | Driver door inoperative - connector C2 terminal D
and connector C1 terminal H |
| • | Passenger door inoperative - connector C2 terminal D
and connector C1 terminal G |
Does the voltage equal the specified value?
| B+
| Go to
Step 5
| Go to
Step 6
|
4
|
- Reconnect the multi-function alarm module harness connectors.
- Use the J 39200
DMM
in order to measure the voltage between the multi-function alarm module connector
and ground:
| • | Driver door - terminal H of connector C1 |
| • | Passenger door - terminal G of connector C1 |
Does the voltage equal the specified value?
| B+
| Go to
Step 7
| Go to
Step 9
|
5
|
- Backprobe the multi-function alarm module between terminal F
of connector C2 and ground.
- Measure the voltage.
Does the voltage equal the specified value?
| B+
| Go to
Step 8
| Go to
Step 9
|
6
|
- Backprobe the inoperative door jamb switch between terminal A
and ground.
- Use the J 39200
DMM
in order to measure the voltage.
Does the voltage equal the specified value?
| B+
| Go to
Step 10
| Go to
Step 16
|
7
|
- Backprobe the inoperative door jamb switch between terminal A
and ground.
- Use the J 39200
DMM
in order to measure the voltage.
Does the voltage equal the specified value?
| B+
| Go to
Step 11
| Go to
Step 12
|
8
|
- Backprobe the dome lamp between terminal A (uplevel)
of terminal B (base and sunroof) and ground.
- Use the J 39200
DMM
in order to measure the voltage.
Does the voltage equal the specified value?
| B+
| Go to
Step 13
| Go to
Step 14
|
9
| Replace the multi-function alarm module.
Did you complete the repair?
| --
| Go to
Interior Lamps System Check
| --
|
10
| Repair a short to ground in the appropriate CKT between
the inoperative door jamb switch and the multi-function alarm module:
| • | Passenger door - CKT 395 |
Refer to
Wiring Repairs
in
Wiring Systems.
Did you complete the repair?
| --
| Go to
Interior Lamps System Check
| --
|
11
|
- Backprobe the inoperative door jamb switch between terminal B
and ground.
- Use the J 39200
DMM
in order to measure the voltage.
Does the voltage equal the specified value?
| B+
| Go to
Step 15
| Go to
Step 16
|
12
| Repair an open in the appropriate CKT between the inoperative door jamb
switch and the multi-function alarm module:
| • | Passenger door - CKT 395 |
Refer to
Wiring Repairs
in
Wiring Systems.
Did you complete the repair?
| --
| Go to
Interior Lamps System Check
| --
|
13
| Repair the open in CKT 156, between the dome lamp
and the multi-function alarm module. Refer to
Wiring Repairs
in Wiring Systems.
Did you complete the repair?
| --
| Go to
Interior Lamps System Check
| --
|
14
| Repair the open in CKT 1732, between the multi-function
alarm module and the dome lamp. Refer to
Wiring Repairs
in Wiring Systems.
Did you complete the repair?
| --
| Go to
Interior Lamps System Check
| --
|
15
| Repair an open in the appropriate CKT between the inoperative
door jamb switch and ground:
| • | Passenger door - CKT 250 |
Refer to
Wiring Repairs
in
Wiring Systems.
Did you complete the repair?
| --
| Go to
Interior Lamps System Check
| --
|
16
| Replace the inoperative door jamb switch.
Did you complete the repair?
| --
| Go to
Interior Lamps System Check
| --
|
