Tools Required

J 42059 Cigar Lighter Socket Remover

1. Remove the power accessory receptacle fuse.
2. Remove the power accessory receptacle access cover.
3. Remove the power accessory receptacle by placing one side of the "T" portion of J 42059 into the tab window. Angle the other side into the opposite tab window. Pull the power accessory receptacle straight out.



4. Remove J 42059 from the power accessory receptacle.
5. Disconnect the electrical connector from the power accessory receptacle.
6. Using your index finger pull out the power accessory receptacle retainer.



7. If the standard method fails to remove the socket, use the following alternate method:

7.1.	Insert a small grinding tool (2) with a cutoff wheel into the socket.

7.2.	Remove the plastic latches (1) in the 3 mm (0.11 in) square windows.

7.3.	Use J 42059 as directed above to remove the socket.

1. Install the power accessory receptacle retainer by pressing the retainer into place until fully seated.
2. Connect the electrical connector to the power accessory receptacle.



3. Align the power accessory receptacle to the slots in the retainer opening.
4. Install the power accessory receptacle to the retainer opening.
5. Press the power accessory receptacle into place until fully seated in the retainer.
6. Install the power accessory receptacle fuse.
7. Inspect the power accessory receptacle for proper operation.
8. Install the power accessory receptacle access cover.