Instrument Cluster Trim Panel Replacement Chevrolet

1. Disable the SIR system. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling in SIR.
2. Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement .
3. Remove the screws (1) from the I/P cluster trim panel (3).
4. Remove the I/P cluster trim panel (3). Pull rearward in order to disengage the retainers (2).
5. Disconnect the electrical connectors for the headlamp dimmer switch.
6. Disconnect the electrical connector for the cigar lighter, if equipped.

1. Connect the electrical connector for the cigar lighter, if equipped.
2. Connect the electrical connectors for the headlamp dimmer switch.
3. Align the retaining tabs (2) with the I/P carrier.
4. Install the I/P cluster trim panel (3). Press the plate into the I/P carrier to engage the retainers (2).

Notice: Refer to Fastener Notice in the Preface section.

5. Install the screws (1) to the I/P cluster trim panel (3).

Tighten
Tighten the screws to 2.3 N·m (20 lb in).

6. Install the I/P cluster trim panel (3). Refer to Instrument Panel Trim Pad Replacement .
7. Enable the SIR system. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling in SIR.