Removal Procedure
- Remove the headlining trim finish panel. Refer to 
Headlining Trim Panel Replacement 
 in Interior Trim.
 
- Disconnect the electrical
connector from the following components:
 
| 2.1.  | The sunroof control switch (3) | 
 
| 2.2.  | The sunroof express module (2) | 
 
| 2.3.  | The sunroof motor (4) | 
 
| 2.4.  | The body harness (1). | 
 
Important: 
|    •  | Note the location of the wiring harness. | 
 
|    •  | Note the location of the tie-straps that secure the harness to
the drive cables and to the sunroof module. | 
 
- Remove the wiring harness from the sunroof.
 
Installation Procedure
- Install the wiring harness
to the sunroof.
 
- Connect the electrical connector to the following components:
 
| 2.1.  | The body harness (1) | 
 
| 2.2.  | The sunroof control switch (3) | 
 
| 2.3.  | The sunroof express module (2) | 
 
| 2.4.  | The sunroof motor (4) | 
 
- Install the headlining trim finish panel. Refer to 
Headlining Trim Panel Replacement 
 in Interior Trim.
 
- Inspect the sunroof for proper operation.