GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Torrent 🢒 Engine 🢒 Engine Electrical 🢒 Battery Positive Cable Replacement

Removal Procedure

Important: 

   • Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
   • Always route the replacement cable the same way as the original cable.

  1. Remove the battery. Refer to Battery Replacement .

    2. Object Number: 934966 Size: SH
  2. Remove the underhood fuse block (UHFB) cover.
  3. Remove the positive battery cable nut from the UHFB.
  4. Remove the positive battery cable (2) from the UHFB.

    5. Object Number: 1371155 Size: SH
  5. Remove the battery box. Refer to Battery Box Replacement .
  6. Disconnect the battery cable retainers (1) from the battery tray.

    7. Object Number: 1371162 Size: SH
  7. Remove the positive battery terminal nut (5) from the starter solenoid.

    8. Object Number: 1371160 Size: SH
  8. Disconnect the positive battery cable (1) from the starter solenoid.
  9. Remove the positive battery cable from the wire loom.

Installation Procedure
  1. Install the positive battery cable into the wire loom.

    2. Object Number: 1371160 Size: SH
  2. Connect the positive battery cable (1) to the starter solenoid.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1371162 Size: SH
  3. Install the positive battery terminal nut (5) to the starter

    4. Tighten
    Tighten the nut to 10 N·m (89 lb in).


    Object Number: 1371155 Size: SH
  4. Connect the battery cable retainers (1) to the battery tray.
  5. Install the battery box. Refer to Battery Box Replacement .

    6. Object Number: 934966 Size: SH
  6. Install the positive battery cable (2) to the UHFB.
  7. Install the positive battery cable nut to the UHFB.

    8. Tighten
    Tighten the nut to 15 N·m (11 lb ft).

  8. Install the UHFB cover.
  9. Install the battery. Refer to Battery Replacement .