Removal Procedure
- Raise and support the vehicle. Refer to 
Lifting and Jacking the Vehicle
.
 
- Remove the toe link to knuckle nut and bolt.
 
- Remove the toe link to support nut and bolt.
 
- Remove the toe link from the vehicle.
 
Installation Procedure
- Install the toe link to the support assembly.
 
Important: 
|    •  | Install the bolt with the head towards the front of the vehicle. | 
 
|    •  | Position the cam nut in same position as in the upper control arm. | 
 
- Install the toe link to support nut and bolt.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the toe link to the knuckle.
 
Tighten
Tighten the bolt to 160 N·m (118 lb ft).
- Tighten the toe link to support bolt.
 
Tighten
Tighten the bolt to 160 N·m (118 lb ft).
- Lower the vehicle.
 
- Check the rear alignment. Refer to 
Wheel Alignment Measurement
.