Removal Procedure
- Disable the supplemental inflatable
restraint (SIR) system. Refer to 
SIR Disabling and Enabling 
in SIR.
 
- Remove the front floor console. Refer to 
Console Replacement 
 in Instrument Panel, Gages, and Console.
 
- Disconnect the warning lamp switch electrical connector (2).
 
- Remove the warning lamp switch mounting screw (1).
 
- Remove the switch from the park brake lever assembly.
 
Installation Procedure
- Align the park brake warning lamp switch
locating tab to the locating hole on the park brake lever assembly.
 
- Install the switch to the park brake lever.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the park brake warning lamp switch mounting screw (1).
 
Tighten
Tighten the screw to 4 N·m (35 lb in).
- Connect the park brake warning lamp switch electrical connector (2).
 
- Install the front floor console. Refer to 
Console Replacement 
 in Instrument Panel, Gages, and Console.
 
- Enable the SIR system. Refer to 
SIR Disabling and Enabling 
 in SIR.
 
- Verify correct park brake warning lamp operation.