Removal Procedure
- Disable the supplemental inflatable restraint (SIR) system.
Refer to 
SIR Disabling and Enabling 
 in
SIR.
 
- Remove the front floor console. Refer to 
Console Replacement 
 in Instrument Panel, Gages, and Console.
 
- With park brake lever in the released position, using ONLY hand tools, remove
the park brake cable adjusting nut and washer.
 
- Release the rear park brake cable ends from the cable equalizer on the
front cable.
 
- Remove the front park brake cable from the park brake lever by pulling
the cable rearward.
 
Installation Procedure
- Install the front park brake cable to the park brake lever.
 
- Install the rear cable ends to the cable equalizer.
 
- Using ONLY hand tools, install the washer and NEW adjusting nut (1) to
the front park brake cable.
 
- Adjust the park brake cable tension. Refer to 
Park Brake Adjustment 
 .
 
- Install the front floor console. Refer to 
Console Replacement 
 in Instrument Panel, Gages, and Console.
 
- Enable the SIR system. Refer to 
SIR Disabling and Enabling 
 in SIR.