Removal Procedure
- Remove the center trim bezel. Refer to 
Instrument Panel Accessory  Bezel Replacement 
 in
Instrument Panel, Gages, and Console.
 
- Remove the screws holding the shift indicator
to the center console trim bezel and disconnect the electrical connector.
 
- Remove the shift indicator from the center trim
bezel.
 
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Align the shift indicator with the center trim bezel and fasten with the screws.
 
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Connect the electrical connection to the center trim bezel.
 
- Attach the center trim bezel to the center stack. Verify proper operation.
Refer to 
Instrument Panel Accessory  Bezel Replacement 
 in Instrument Panel, Gages, and Console.