Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section.

Preliminary Procedures

1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove center pillar lower molding. Refer to Center Pillar Lower Garnish Molding Replacement.
3. Release seat belt from seat side anchor.

1

Seat Belt Retractor Pretensioner Adjuster Cover

2

Seat Belt Retractor Pretensioner Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tip
Apply Permatex® 24200 on all restraint fasteners prior to installation.

Tighten
45 N·m (33 lb ft)

3

Seat Belt Retractor Pretensioner Adjuster Bolt

Tighten
45 N·m (33 lb ft)

4

Seat Belt Retractor Pretensioner Assembly

Tip

1. Disconnect the electrical connectors.
2. Discharge and dispose of pretensioner assembly using the appropriate procedure. Refer to Pretensioner Handling and Scrapping.