- Inspect the middle control
valve body (370) casting for the following conditions:
 
| •  | Damaged machine surface | 
 
- Inspect all valves, springs, bushings, and clean all components
in clean solvent.
 
- Install the reverse shift
ball check valve bushing - inner (373).
 
- Install the reverse shift ball check valve (374).
 
- Install the reverse shift ball check valve bushing - outer (375).
 
- Install the sleeve/bore plug retainer (362).
 
- Install the solenoid relay
valve spring (379).
 
- Install the solenoid relay valve (378).
 
- Install the solenoid relay valve plunger (377).
 
- Install the solenoid relay valve sleeve (376).
 
- Install the sleeve/bore plug retainer (362).
 
- Install the 3rd gear band
(B4) release valve spring (384).
 
- Install the 3rd gear band (B4) release valve (385).
 
- Install the U2 shift valve bore plug (394).
 
- Install the sleeve/bore plug retainer (362).
 
- Install the U1 shift valve (386).
 
- Install the U1 shift valve spring (387).
 
- Install the U2 shift valve bore plug (394).
 
- Install the sleeve/bore plug retainer (362).
 
- Install the M1 shift valve (389).
 
- Install the M1 shift valve spring (390).
 
- Install the M1 shift valve bore plug (391).
 
- Install the sleeve/bore plug retainer (362).
 
- Install the U2 shift valve (392).
 
- Install the U2 shift valve spring (393).
 
- Install the U2 shift valve bore plug (394).
 
- Install the sleeve/bore plug retainer (362).
 
- Install the primary regulator
valve (395).
 
- Install the primary regulator valve spring (396).
 
- Install the primary regulator valve plunger (397).
 
- Install the primary regulator valve sleeve (398).
 
- Install the sleeve/bore plug retainer (362).
 
- Install the 5 accumulator
check valve assemblies (353).
 
- Install the cooler by-pass valve spring (380).
 
- Install the cooler by-pass valve (381).
 
- Install the TCC check valve spring (383).
 
- Install the TCC check valve (382).