Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Component Connector End Views | |||
1 | Did you review the Theft Deterrent Description and Operation and the necessary inspections? | Go to Step 2 | |
2 | Arm the theft deterrent system. Does the security indicator remain steady for 10 seconds and then flash? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Inspect the security indicator circuit. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 7 | Go to Step 4 |
4 | Replace the security indicator. . Did you find and correct the condition? | Go to Step 7 | Go to Step 5 |
5 | Inspect for poor connections at the harness connector of the anti-theft module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
6 | Replace the anti-theft module. Refer to Control Module References . Is the repair complete? | Go to Step 7 | -- |
7 | Operate the system to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
