Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Component Connector End Views | |||
1 | Did you review the Theft Deterrent System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Test cavity 10 of the Theft Deterrent Control Module for battery positive voltage. Refer to Circuit Testing . Is voltage present? | Go to Step 3 | Go to Step 4 |
3 | Test cavity 29 of the Theft Deterrent Control Module for continuity to ground. Refer to Circuit Testing . Is ground present? | Go to Step 6 | Go to Step 5 |
4 | Repair open or high resistance in the Theft Deterrent Module supply voltage circuit between cavity 10 of the Theft Deterrent Module and the 10A ECU-IG fuse. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 7 | -- |
5 | Repair open or high resistance in the Theft Deterrent Module ground circuit between cavity 29 of the Theft Deterrent Module and G201. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 7 | -- |
6 | Replace the Theft Deterrent Module. Refer to Control Module References . Did you complete the repair? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair? Did you complete the repair? | System OK | Go to Step 3 |
