Step | Action | Values | Yes | No |
|---|---|---|---|---|
1 | Inspect the chime module connector to make sure it is connected properly. Is the connector disconnected or partially disconnected? | -- | Go to Step 2 | Go to Step 3 |
2 | Connect the electrical connector for the chime module. Is the repair complete? | -- | System OK | -- |
3 | Inspect fuse EF7 and F12. Is fuse EF7 and F12 open? | -- | Go to Step 4 | Go to Step 5 |
4 |
Is the repair complete? | -- | System OK | -- |
5 |
Is the specified voltage available at fuse EF7 and F12? | 11-14 V | Go to Step 7 | Go to Step 6 |
6 | Repair the power supply circuit for fuse EF7 and F12. Is the repair complete? | -- | System OK | -- |
7 |
Does the voltage equal the specified value? | 11-14 V | Go to Step 13 | Go to Step 8 |
8 |
Does the ohmmeter indicate the specified value? | 0 ohms | Go to Step 10 | Go to Step 9 |
9 | Repair the open circuit between the key reminder switch and fuse EF7 and F12. Is the repair complete? | -- | System OK | -- |
10 | With the key reminder switch and the chime module disconnected, check the continuity between the key reminder switch and terminal 2 of the chime module connector. Does the ohmmeter indicate the specified value? | 0 ohms | Go to Step 12 | Go to Step 11 |
11 | Repair the open circuit between the key reminder switch and terminal 2 of the chime module connector. Is the repair complete? | -- | System OK | -- |
12 | Replace the key reminder switch. Is the repair complete? | -- | System OK | -- |
13 | With the chime module disconnected, use an ohmmeter to check continuity between terminal 5 of the chime module connector and ground. Does the ohmmeter indicate the specified value? | 0 ohms | Go to Step 15 | Go to Step 14 |
14 | Repair the open circuit between terminal 5 of the chime module connector and ground. Is the repair complete? | -- | System OK | -- |
15 | Replace the chime module. Is the repair complete? | -- | System OK | -- |
