Removal Procedure
Notice: Refer to Fuel Pressure Notice in the Preface section.
- Relieve the fuel system pressure. Refer to 
Fuel Pressure Relief
 .
 
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
 
- Disconnect the inlet/outlet fuel lines by moving the line connector lock forward and pulling the hose off of the fuel filter tube.
 
- Disconnect the fuel filter ground.
 
- Remove the fuel filter bracket bolts.
 
- Pull the fuel filter out of the retaining clamp.
 
Installation Procedure
- Install the new fuel filter into the retaining clamp. Note the flow direction.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the fuel filter bracket bolts.
 
Tighten
Tighten the fuel filter bracket bolts to 4 N·m (35 lb ft.
- Connect the inlet/outlet lines. Secure the lines with the connector lock.
 
- Connect the negative battery cable.
 
- Perform a leak test of the fuel filter.