Removal Procedure
- Remove the left closeout/insulator panel. Refer to 
Instrument Panel Insulator Panel Replacement - Left Side 
 in Instrument Panel, Gages,
and Console.
 
- Remove the knee bolster trim panel. Refer to 
Driver Knee Bolster Panel Replacement 
 in Instrument Panel, Gages, and
Console.
 
- Remove the instrument panel (I/P) cluster bezel, Chevrolet only. Refer
 to 
Instrument Panel Cluster Trim Plate Bezel Replacement 
 in Instrument Panel, Gages, and Console. 
 
- Remove the radio. Refer to 
Radio Replacement 
 in Entertainment.
 
- Remove the 2 screws (1) from the bottom of the air outlet assembly.
 
- Remove the air deflectors from the outlet. Refer to 
Instrument Panel Air Outlet Replacement 
.
 
- Grasp and pull the outlet rearward from the I/P.
 
- Remove the outlet from the vehicle.
 
Installation Procedure
- If reinstalling the original outlet, install the air deflectors in the outlet.
 Refer to 
Instrument Panel Air Outlet Replacement 
.
 
- Install the outlet assembly to the I/P.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the 2 retaining screws (1).
 
Tighten
Tighten the screws to 2.5 N·m (22 lb in).
- Install the radio. Refer to 
Radio Replacement 
 in Entertainment.
 
- Install the I/P cluster bezel, Chevrolet only. Refer to 
Instrument Panel Cluster Trim Plate Bezel Replacement 
 in Instrument Panel,
Gages, and Console.
 
- Install the knee bolster trim panel. Refer to 
Driver Knee Bolster Panel Replacement 
Instrument Panel, Gages, and Console.
 
- Install the left closeout/insulator panel. Refer to 
Instrument Panel Insulator Panel Replacement - Left Side 
 Instrument Panel, Gages, and
Console.