SMU - Revised Rear Axle Fluid Capacity and Fluid Level Checking. Saab 9-7x 2006

Subject:

Revised Rear Axle Fluid Capacity and Fluid Level Checking Specification

Models:

2005-2006 Saab 9-7X

This bulletin is being issued to revise the rear axle fluid capacity and fluid level checking specification in the Rear Axle sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

Application	Specification
Metric	English
Rear Axle	2.0 liters* Correct fluid level is 0-10 mm below the fill plug opening.	4.2 pints* Correct fluid level is 0-0.4 in below the fill plug opening.
* With a complete drain/refill, add 118 ml (4.0 oz) of limited slip axle lubricant additive to the axle in addition to the axle lubricant.

Application

Specification

Metric

English

Rear Axle

2.0 liters*

Correct fluid level is 0-10 mm below the fill plug opening.

4.2 pints*

Correct fluid level is 0-0.4 in below the fill plug opening.

* With a complete drain/refill, add 118 ml (4.0 oz) of limited slip axle lubricant additive to the axle in addition to the axle lubricant.