Removal Procedure
- Remove the heating/air conditioning control. Refer to 
Heater and Air Conditioning Control Replacement.
 
- Remove the accessory panel on instrument panel (I/P) padding. 
 
| 2.1.  | Remove the 2 bolts (1).  | 
 
| 2.3.  | Disconnect the wiring harness plug (2).  | 
 
| 2.4.  | Release and disconnect the wiring harness plug. | 
 
- Remove the accessory panel. 
 
Release the 2 locks (1). 
Installation Procedure
- Install the accessory panel. 
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the accessory panel on I/P padding. 
 
| •  | Connect the wiring harness plug. | 
 
| •  | Install the accessory trim panel.  | 
 
Tighten 
Tighten the 2 bolts to 2.5 N·m (22 lb in). 
- Install heating/air conditioning unit control. Refer to 
Heater and Air Conditioning Control Replacement.