Sunshade Replacement Visor
Removal Procedure
Remove the sunshade.
| • | Disconnect the wiring harness plug. |
| • | Remove the sunshade from the support. |
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
Install the sunshade.
| • | Connect the wiring harness plug. |
| • | Install the sunshade into the main bracket. |
Tighten
Tighten the 2 bolts to 2.2 N·m (19 lb in).
Sunshade Replacement Visor Cover
Removal Procedure
- Remove the sunshade cover (1).
- Remove the 2 clips.
Installation Procedure
- Install the sunshade cover.
- Install the 2 clips.
