Removal Procedure
- Remove the rear side door trim panel.
 
Remove the access panel with a plastic wedge.
Important: The moveable handle part must now be secured in pulled position.
- Remove the rear door fixed handle part.
 
| •  | Pull out and hold the moveable handle part (I). | 
 
| •  | Turn the bolt (II) left until it stops. | 
 
| •  | Remove the fixed handle part with lock cylinder (IV). | 
 
- Remove the door handle.
 
Pull back the moveable handle part (III) to remove.
Installation Procedure
- Install the door handle.
 
Install the moveable handle part into the door panel.
Important: Hold the moveable handle part in place while turning the bolt.
- Install the rear door fixed handle part.
 
| •  | Install the fixed handle part. | 
 
| •  | Turn the bolt right until it stops. | 
 
- Install the front side door trim panel.