Condition
| Action
|
DEFINITION: Slips in reverse or no reverse
|
Fluid level low and/or burnt
|
| • | If low inspect for fluid leak, repair as necessary. |
| • | Inspect transmission oil cooler system for restricted or kinked lines. |
|
Fluid is contaminated with water or engine coolant
| If contaminated with engine coolant replace transmission.
|
Unit filled with wrong type of fluid
| Drain fluid and fill with proper type of fluid.
|
Shift cable or neutral park switch out of adjustment
|
| • | Inspect neutral park switch alignment, adjust to correct position. |
| • | Inspect shift cable adjustment, adjust for proper operation. |
|
Line pressure control solenoid valve assembly (SLT) (312)
|
| • | Perform electrical function checks on the line pressure control solenoid valve assembly circuit. |
| • | Perform electrical function check on the line pressure control solenoid valve assembly (312). |
| • | Replace valve body assembly (39) if line pressure control solenoid valve assembly (312) is faulty. |
|
Torque converter (1)
| Replace torque converter (1).
|
Valve body (39)
| Replace valve body (39).
|
Internal transmission part failure
|
| • | Disassemble the transmission and inspect the following: |
| - | Clutch assemblies, O-rings cut or damaged, clutch disc failure |
| - | Fluid pump wore, scored or broken gears |
| • | Replace transmission if any internal parts are faulty. |
|
