Draining Procedure
Important: Drain and measure as much of the refrigerant oil as possible from the removed compressor.
- Remove the compressor crankcase oil drain plug and drain the crankcase into a clean, graduated container. 
 
- Drain the oil from both the suction and discharge ports of the removed compressor into the same container. Rotate the compressor shaft to assist in draining the compressor. 
 
- Measure and record the amount of oil drained from the removed compressor. This measurement will be used during installation of the replacement compressor. 
 
- Properly discard the used refrigerant oil. 
 
Balancing Procedure
Important: The refrigerant oil in the A/C system must be balanced during compressor replacement. 
- Drain the new compressor.
 
- Add the same quantity of new oil to the new compressor that was drained from the removed compressor.