Special Tools

KM-652 Flywheel Holding Tool

1. Remove the automatic transmission.
2. Detach the drive disc.

•	Lock the drive disc via starter ring gear with KM-652 (1).

•	Remove the 6 bolts.

Caution: Refer to Fastener Caution in the Preface section.

1. Attach the drive disc.

•	Clean thread in crankshaft.

•	Use new bolts.

Tighten
Tighten the 6 bolts to 60 N·m (44 lb ft).

•	Remove KM-652 .

2. Install the automatic transmission.