| 2.1. | Remove the 2 bolts (1). |
| 2.2. | Remove the panel. |
| 2.3. | Disconnect the wiring harness plug (2). |
| 2.4. | Release and disconnect the wiring harness plug. |
Release the 2 locks (1).
Caution: Refer to Fastener Caution in the Preface section.
| • | Connect the wiring harness plug. |
| • | Install the accessory trim panel. |
Tighten
Tighten the 2 bolts to 2.5 N·m (22 lb in).