Removal Procedure
- Remove the air cleaner outlet duct .
 
- Remove the air cleaner assembly attachment fasteners.
 
- Remove the air cleaner.
 
Installation Procedure
Important: Verify full engagement of the inlet onto the resonator neck.
- Position the air cleaner assembly.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the air cleaner assembly attachment bolts.
 
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Connect the air cleaner resonator to the air cleaner assembly.
 
Tighten
Tighten the air cleaner outlet duct clamps to 5 N·m (44 lb in).