For 1990-2009 cars only
Removal Procedure
- Pull back the drivers side wheelhouse liner to access the washer pump. Refer to Front Wheelhouse Liner Replacement in Body Front End.
- Disconnect the electrical connector from the washer pump.
- Disconnect the fluid hose from the washer pump, making sure to capture any spilling solvent.
- Remove the washer pump from the washer solvent container by pulling firmly on the pump.
Installation Procedure
- Install the washer pump to the washer solvent container pressing into place until fully seated.
- Connect the fluid hose from the washer pump.
- Connect the electrical connector to the washer pump.
- Fill the washer solvent container with new washer solvent.
- Inspect the wiper/washer system for proper operation.
- Pull back the drivers side wheelhouse liner. Refer to Front Wheelhouse Liner Replacement in Body Front End.
