GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2004 🢒 L300/LW300 🢒 HVAC 🢒 HVAC Systems - Manual 🢒 Temperature Control Cable Replacement

Removal Procedure

    Object Number: 892663 Size: SH
  1. Remove the HVAC control module. Refer to Heater and Air Conditioning Control Replacement .
  2. Remove the right side console closeout panel.

    3. Caution: Heater core pipes may be hot!

  3. Remove the cable from the module retaining clip using the first 2 fingers to pull outward on the cable while using the thumb to spread the retaining clip.

    4. Object Number: 894050 Size: SH
  4. Remove the cable from the temperature door lever by squeezing the end of the pin and pulling the cable eyelet outward.
  5. Remove the cable from the vehicle.

Installation Procedure

    Object Number: 894050 Size: SH
  1. Install the temperature control cable to the vehicle.
  2. Route the new cable in through the HVAC control assembly opening in the instrument panel (I/P). The cable housing flag goes to the HVAC control assembly end.
    3. 2.1. Route the new cable in through the HVAC control assembly opening in the I/P.
    2.2. The cable housing flag goes to the HVAC control assembly end.
    2.3. Guide the cable around outside of the I/P support brace.
  3. Install the cable eyelet onto the temperature door lever pin.
  4. Install the right side console closeout panel.
  5. Install the HVAC control module. Refer to Heater and Air Conditioning Control Replacement .