GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2005 🢒 L300/LW300 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Cruise Control Module Replacement

Removal Procedure

    Object Number: 897266 Size: SH
  1. Turn the ignition OFF.
  2. Remove the cruise control module to bracket bolts leaving the bracket attached to the frame rail.
  3. Remove the cruise control throttle cable clip attached to the front of the dash.
  4. Pull the cruise control module up behind the power brake booster.

    5. Object Number: 896792 Size: SH
  5. Disconnect the cruise control module harness connector.
    6. • Cruise Control Throttle Cable (1)
    • Cable Snap (3)
    • Cable End (4)
  6. Disconnect the cruise control throttle cable snap from the throttle body cam.
  7. Unclip the cruise control throttle cable from both attachment clips.

    8. Object Number: 887102 Size: MH
  8. Disconnect the cruise control throttle cable from the module by rotating the cable ¼ turn counter-clockwise at the module.
  9. Remove the cable from the connecting strap.
  10. Remove and discard the cut cruise control throttle cable and replace with an adjustable cruise control throttle cable.

Installation Procedure

    Object Number: 897266 Size: SH

    Important: Do not twist the connecting strap during installation.

  1. Connect the cruise control throttle cable to the cruise control module connecting strap.
  2. Install the cruise control throttle cable to the cruise control module by rotating ¼ turn clockwise.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the cruise control module with the throttle cable into the frame rail bracket and install the attachment bolts.

    4. Tighten
    Tighten the cruise control module to frame rail bracket bolts to 10 N·m (89 lb in).


    Object Number: 896792 Size: SH
  4. Install the throttle cable clip to the front of the dash stud.
    5. • Cruise Control Throttle Cable (1)
    • Cable Snap (3)
    • Cable End (4)
  5. Install the cruise control throttle cable snap to the throttle body cam.
  6. Install the cruise control throttle cable to both attachment clips.
  7. Connect the cruise control module harness connector. Push in until a click is heard and pull back to confirm a positive engagement.
  8. Refer to Control Module References for programming and setup information.